Publikacje - dr hab. inż. Arkadiusz Antończak, prof. uczelni


  • , Szustakiewicz K., Stępak B.D., Antończak A.J., Maj M., Gazińska M., Kryszak B., Pigłowski J., „Femtosecond laser-induced modification of PLLA/hydroxypatite composite”, Polymer Degradation and Stability, 149 (2018) 152–161
  • , Stępak B.D., Dzienny P., Franke V., Kunicki P., Gotszalk T., Antończak A.J., „Femtosecond laser-induced ripple patterns for homogenous nanostructuring of pyrolytic carbon heart valve implant”, Applied Surface Science, 436, (2018) 682–689
  • , Wójcik M.R., Zdunek R., Antończak A.J., „Unsupervised verication of laser-induced breakdown spectroscopy dataset clustering”, Spectrochimica Acta Part B: Atomic Spectroscopy, Vol. 126, (2016) 84-92
  • , Kozioł P., Górski P., Byndas A., Antończak A.J., Stępak B.D., Abramski K.M., „Experimental verification of the method for producing three-dimensional cross-pairs metamaterials structure based on a dielectric AlN cube”, Journal of Physics D: Applied Physics, 49, (2016) doi:10.1088/0022-3727/49/6/065104
  • , Stępak B.D., Antończak A.J., Abramski K.M., „Rapid fabrication of microdevices by controlling the PDMS curing conditions during replication of a laser-prototyped mould”, J. Micromech. Microeng., 25, (2015) 1–8
  • , Wójcik M.R., Antończak A.J., Stępak B.D., Kozioł P.E., Łazarek Ł.K., Abramski K.M., „Direct laser writing of Fresnel microlenses with use of scanning contour ablation method”, International Journal of Advanced Manufacturing Technology, (2015) DOI 10.1007/s00170-014-6750-2
  • , Antończak A.J., Skowroński Ł., Trzcinski M., Kinzhybalo V., Kozioł P.E., Abramski K.M., „Laser-induced oxidation of titanium substrate: Analysis of the phys-icochemical structure of the surface and sub-surface layers”, Applied Surface Science, 325, (2015) 217–226
  • , Skowroński Ł., Trzcinski M., Kustra M., Wachowiak W., Naparty M.K., Hiller T., Bukaluk A., Wronkowska A.A., Domanowski P., Antończak A.J., „Characterisation of coloured of TiO2/Ti/glass systems”, Applied Surface Science, 322, (2014) 209–214
  • , Stępak B., Antończak A.J., Szustakiewicz K., Kozioł P., Abramski K.M., „Degradation of poly(L-lactide) under KrF excimer laser treatment”, Polymer Degradation and Stability, 110, (2014) 156–164
  • , Antończak A.J., Stępak B.D., Szustakiewicz K., Wójcik M.R., Abramski K.M., „Degradation of poly(L-lactide) under CO2 laser treatment above the ablation threshold”, Polymer Degradation and Stability, 109, (2014) 97–105
  • , Łazarek Ł., Antończak A.J., Wójcik M., Drzymała J., Abramski K.M., „Evaluation of the laser-induced breakdown spectroscopy technique for determination of chemical composition of copper concentrates”, Spectrochimica Acta Part B: Atomic Spectroscopy, 97, (2014) 74–78
  • , Balcerowska-Czerniak G., Wronkowski A., Antończak A.J., Skowroński Ł., Wronkowska A.A., „The potential of multivariate analysis to phase identification based on X-ray diffraction patterns”, Chemometrics and Intelligent Laboratory System, 135 (2014) 126–132
  • , Skowroński Ł., Antończak A.J., Trzcinski M., Łazarek Ł., Hiller T., Bukaluk A., Wronkowska A.A., „Optical properties of laser induced oxynitride films on titanium”, Applied Surface Science, 304, (2014) 107-114
  • , Stępak B., Antończak A.J., Bartkowiak-Jowsa M., Filipiak J., Pezowicz C., Abramski K.M., „Fabrication of a polymer-based biodegradable stent using a CO2 laser”, Archiv. Civ. Mech. Eng., 14:2 (2014) 317–326
  • , Antończak A.J., Stępak B., Kozioł P.E., Abramski K.M., „The influence of process parameters on the laser-induced colouring of titanium”, Applied Physics A: Materials Science & Processing, 115:3 (2014) 1003–1013
  • , Kozioł P.E., Antończak A.J., Szymczyk P.E., Stępak B., Abramski K.M., „Conductive aluminum line formation on aluminum nitride surface by infrared nanosecond laser”, Applied Surface Science, 287, (2013) 165-171
  • , Kozioł P.E., Gorski P.A., Antonczak A.J., Kabacik P., Abramski K.M., „Spiral Resonator manufactured on AlN ceramics to filter the coupled wave between patch antennas”, Opto-Electronics Review, 21:4, (2013) 395-401
  • , Antończak A.J., Nowak M.R., Szustakiewicz K., Pigłowski J., Abramski K.M., „The influence of organobentonite clay on CO2 laser grooving of nylon 6 composites”, Int. J. Adv. Manuf. Tech., 69:5-8, (2013) 1389-1401
  • , Nowak M.R., Antończak A.J., Kozioł P.E., Abramski K.M., „Laser prototyping of printed circuit boards”, Opto-Electronics Review, 21:3, (2013) 45-50
  • , Antończak A.J., Soboń G., Abramski K.M., „Simple wavelength pre-selection and stabilization of the single-frequency operation of a microchip laser”, Opto-Electronics Review, 21:2, (2013) 199-204
  • , Antończak A.J., Kocoń D., Nowak M., Kozioł P., Abramski K.M., „Laser-induced colour marking-Sensitivity scaling for a stainless steel”, Applied Surface Science, 264, (2013) 229-236
  • , Antończak A.J., Kozioł P., Sotor J.Z., Kaczmarek P.R., Abramski K.M., „Laser Doppler vibrometry with a single-frequency microchip green laser”, Measurement Science & Technology, 22:11, (2011) 115306-1-10
  • , Soboń G., Kaczmarek P., Antończak A.J., Sotor J.Z., Wąż A., Abramski K.M., „Pulsed dual-stage fiber MOPA source operating at 1550 nm with arbitrarily shaped output pulses”, Applied Physics B, 105:4 (2011) 721-727
  • , Soboń G., Kaczmarek P., Antończak A.J., Sotor J.Z., Abramski K.M., „Controlling the 1µm spontaneous emission in Er/Yb co-doped fiber amplifiers”, Optics Express, 19:20 (2011) 19104-19113
  • , Sotor J.Z., Dudzik G., Antończak A.J., Abramski K.M., „Single-longitudinal mode, monolithic, green solid-state laser”, Applied Physics B: Lasers and Optics, 103:1 (2011) 67-74
  • , Antończak A.J., Sotor J.Z., Matysiak M., Abramski K.M., „Blue 473-nm solid state diode pumped Nd:YAG/ BiBO microchip laser”, Opto-Electronics Review, 18:1 (2010) 71-74
  • , Kaczmarek P.R., Soboń G., Sotor J.Z., Antończak A.J., Abramski K.M., „Fiber-MOPA sources of coherent radiation”, Bulletin of the Polish Academy of Sciences, 58:4 (2010) 485-489
  • , Sotor J.Z., Antończak A.J., Abramski K.M., „Single-longitudinal mode Nd: YVO4/YVO4/KTP green solid state laser”, Opto-Electronics Review, 18:1 (2010) 75-79
  • , Antończak A.J., Sotor J.Z., Abramski K.M., „Single frequency microchip solid state diode pumped lasers”, Bulletin of the Polish Academy of Sciences, (2008) 56:2 (2008) 113-116
  • , Kaczmarek P.R., Rogowski T., Antończak A.J., Abramski K.M., „Laser Doppler vibrometry with acoustooptic frequency shift”, Optica Applicata, 34:2 (2004) 373-384